ND013PBM12864-A02 | 1.3 inch OLED Display 128x64 Resolution with SPI Interface Compatible with Arduino and ESP32
Upgrade your electronics projects with this 1.3 inch OLED display, built for engineers needing high contrast, compact dimensions, and seamless integration. With 128×64 resolution, wide 160° viewing angle, and ultra-slim profile, the ND013PBM12864-A02 is ideal for space-constrained embedded systems and battery-powered designs.
Key Features:
Sharp & Compact Display: 1.3 inch transmissive OLED with 128×64 resolution and 200 Cd/㎡ brightness
Wide Viewing Angle: 160° optimal view for clear readability in all directions
Easy Connectivity: SPI interface with SSD1312 controller, compatible with Arduino, ESP32, STM32, and similar development boards
Reliable Performance: Industrial-grade temperature range from -40°C to 70°C
Slim Profile: 17.1 × 35.8 × 1.41 mm outline, 12-pin connector, no mount frame — perfect for compact enclosures
Whether you’re designing a compact IoT interface, a custom wearable, or an industrial HMI, the ND013PBM12864-A02 gives you a professional-grade display solution — with easy connectivity, wide compatibility, and robust performance in any environment.
Search Keywords:
1.3 inch OLED, 1.3” OLED 128×64, Arduino OLED module, SPI OLED display, SSD1312 OLED screen, OLED screen ESP32, 1.3″ OLED module, low power OLED, embedded OLED display, small OLED panel, wearable OLED, 128×64 OLED SPI
General Specifications
| Part No.: | ND013PBM12864-A02 |
| Size: | 1.3 inch |
| Display Format: | 128×64 Resolution |
| Display Type: | OLED Display |
| Display Mode: | Transmissive |
| Touchscreen: | No (Optional with Yes) |
| Optimal View: | 160 |
| Outline Dimension: | 17.1 (W) X35.8 (H) X1.41(T) mm |
| Active Area: | 14.7(W) X29.42 (H) mm |
| Supply Voltage: | 3.3V |
| Luminance | 200 Cd/㎡ |
| Interface: | SPI |
| Connection Type: | 12 pin connector |
| Controller： | SSD1312 |
| Compatibility: | Arduino and similar development boards |
| Operating Temperature: | -40°C ~ 70°C |
| Storage Temperature: | -40°C ~ 85°C |
| Mount Frame: | None |
Display Drawing
Interface Definition
| NO. | Symbol | Level | Description |
|---|---|---|---|
| 1 | VCC(VPP) | Power Supply for OEL Panel This is the most positive voltage supply pin of the chip. It must be supplied externally. | |
| 2 | VCOMH | Voltage Output High Level for COM signal This pin is the input pin for the voltage output high level for COM signals. A capacitor should be connected between this pin and VSS. | |
| 3 | VDD | 1.65 – 3.5V Power supply for logic and input. | |
| 4 | BS1(IM1) | These are the MPU interface mode select pads. These pins are MCU interface selection input. See the following table: Interface / SPI4 / IIC BS1 / 0 / 1 | |
| 5 | IREF | This is a segment current reference pad. A resistor should be connected between this pad and VSS. | |
| 6 | CS# | This pad is the chip select input. When CS = “L”, then the chip select becomes active, and data/command I/O is enabled. | |
| 7 | RES# | This is a reset signal input pad. When RES is set to “L”, the settings are initialized. The reset operation is performed by the RES signal level. | |
| 8 | D/C# | This is the Data/Command control pad that determines whether the data bits are data or a command in SPI4 interface. DC = “H”: the inputs at D1 are treated as display data. DC = “L”: the inputs at D1 are transferred to the command registers. In IIC interface, this pad serves as SA0 to distinguish the different address of OLED driver. | |
| 9 | D0 | Clock signal pin. | |
| 10 | D1 | Data signal pin. | |
| 11 | VSS | Ground pin. | |
| 12 | NC | No connection. |
Custom 1.3'' PMOLED display
We provide custom 1.3'' PMOLED display modules, allowing you to customize key specifications such as resolution, brightness, and interface. Our solutions also include personalized connector placements and seamless integration with platforms like Arduino, ensuring optimal system performance.
Custom OLED Display
Create the perfect 1.3” PMOLED display with full customization options for size, resolution, and configuration, tailored to meet your unique design and application needs.
Custom OLED Interfaces
Customizable cable lengths and connector configurations for 1.3” PMOLED modules enable precise system integration, ensuring reliable performance and flawless display alignment.
1.3'' OLED PCB Design
Optimized PCB design for 1.3” PMOLED modules ensures efficient power distribution and signal integrity, delivering reliable, high-quality performance in compact systems.
Different Color Options
Choose from various color options for 1.3” PMOLED modules, offering customized visual experiences and enhanced design flexibility to suit your project or application.
Reviews
There are no reviews yet.