ND013PBM12864-A01 | 1.3 inch OLED Display 128x64 Resolution with SPI Interface Compatible with Arduino and ESP32
Enhance your embedded designs with this high-contrast 1.3 inch OLED display, purpose-built for engineers and developers seeking ultra-low power consumption, high legibility, and effortless integration. Featuring 128×64 resolution and wide 160° viewing angle, this transmissive OLED module is ideal for compact, low-power applications.
Key Features:
Sharp Visuals in a Compact Size: 128×64 resolution in a 1.3 inch OLED panel with high contrast and 200 Cd/㎡ brightness
Wide Viewing Angle: 160° optimal view for enhanced visibility in embedded interfaces
Easy Integration: SPI interface and SSD1312 controller, fully compatible with Arduino, ESP32, STM32, and other dev boards
Industrial-Grade Reliability: Operates from -40°C to 70°C, making it ideal for outdoor or harsh environments
Power-Efficient Design: 3.3V supply voltage – perfect for wearables, IoT, and battery-powered projects
ND013PBM12864-A01 is the display of choice for engineers building compact, power-sensitive applications that still demand high readability and easy control. Perfect for smart devices, portable electronics, and industrial prototypes.
Search Keywords:
1.3 inch OLED, 1.3” OLED 128×64, OLED module SPI, Arduino OLED screen, OLED for ESP32, low power OLED display, embedded OLED module, SPI OLED screen
General Specifications
| Part No.: | ND013PBM12864-A01 |
| Size: | 1.3 inch |
| Display Format: | 128×64 Resolution |
| Display Type: | OLED Display |
| Display Mode: | Transmissive |
| Touchscreen: | No (Optional with Yes) |
| Optimal View: | 160 |
| Outline Dimension: | 17.1 (W) X35.8 (H) X1.41(T) mm |
| Active Area: | 14.7(W) X29.42 (H) mm |
| Supply Voltage: | 3.3V |
| Luminance | 200 Cd/㎡ |
| Interface: | SPI |
| Connection Type: | 12 pin connector |
| Controller： | SSD1312 |
| Compatibility: | Arduino and similar development boards |
| Operating Temperature: | -40°C ~ 70°C |
| Storage Temperature: | -40°C ~ 85°C |
| Mount Frame: | None |
Display Drawing
Interface Definition
| NO. | Symbol | Level | Description |
|---|---|---|---|
| 1 | VCC(VPP) | Power Supply for OEL Panel This is the most positive voltage supply pin of the chip. It must be supplied externally. | |
| 2 | VCOMH | Voltage Output High Level for COM signal This pin is the input pin for the voltage output high level for COM signals. A capacitor should be connected between this pin and VSS. | |
| 3 | VDD | 1.65 – 3.5V Power supply for logic and input. | |
| 4 | BS1(IM1) | These are the MPU interface mode select pads. These pins are MCU interface selection input. See the following table: Interface / SPI4 / IIC BS1 / 0 / 1 | |
| 5 | IREF | This is a segment current reference pad. A resistor should be connected between this pad and VSS. | |
| 6 | CS# | This pad is the chip select input. When CS = “L”, then the chip select becomes active, and data/command I/O is enabled. | |
| 7 | RES# | This is a reset signal input pad. When RES is set to “L”, the settings are initialized. The reset operation is performed by the RES signal level. | |
| 8 | D/C# | This is the Data/Command control pad that determines whether the data bits are data or a command in SPI4 interface. DC = “H”: the inputs at D1 are treated as display data. DC = “L”: the inputs at D1 are transferred to the command registers. In IIC interface, this pad serves as SA0 to distinguish the different address of OLED driver. | |
| 9 | D0 | Clock signal pin. | |
| 10 | D1 | Data signal pin. | |
| 11 | VSS | Ground pin. | |
| 12 | NC | No connection. |
Custom 1.3'' PMOLED display
We provide custom 1.3'' PMOLED display modules, allowing you to customize key specifications such as resolution, brightness, and interface. Our solutions also include personalized connector placements and seamless integration with platforms like Arduino, ensuring optimal system performance.
Custom OLED Display
Create the perfect 1.3” PMOLED display with full customization options for size, resolution, and configuration, tailored to meet your unique design and application needs.
Custom OLED Interfaces
Customizable cable lengths and connector configurations for 1.3” PMOLED modules enable precise system integration, ensuring reliable performance and flawless display alignment.
1.3'' OLED PCB Design
Optimized PCB design for 1.3” PMOLED modules ensures efficient power distribution and signal integrity, delivering reliable, high-quality performance in compact systems.
Different Color Options
Choose from various color options for 1.3” PMOLED modules, offering customized visual experiences and enhanced design flexibility to suit your project or application.
Reviews
There are no reviews yet.