NDTI20240320-1 | TFT Module 2.0 inch IPS 240x320 Resolution MCU Parallel Interface ST7789P3 Controller
The NDTI20240320-1 is a high-performance 2 inch display with IPS technology, delivering superior image quality and wide viewing angles for both consumer and industrial applications. With a 240×320 resolution and a 500 cd/m² luminance, this 2 inch screen ensures sharp, vivid, and clear visuals even in bright environments.
Designed for seamless integration, this module features an MCU 8-bit interface, a 22-pin connector, and the reliable ST7789P3 controller, making it highly compatible with Arduino and similar development boards. Its active area of 30.6 x 40.8 mm provides a compact yet versatile size suitable for handheld devices, IoT products, smart instruments, and DIY electronics.
Operating at 2.8V supply voltage with a wide temperature range of -10°C to 60°C, the display is built to perform reliably in various embedded system environments. Optional touchscreen support adds interactivity for more advanced designs.
Whether you’re prototyping with Arduino, Raspberry pi, building portable equipment, or looking for a cost-effective alternative to a 2 inch HDMI screen, the NDTI20240320-1 provides a balance of high brightness, easy integration, and stable performance.
Search Keywords: 2 inch display, 2 inch screenm, 2 inch hdmi screen, 2 inch tft display, 2 inch hdmi display, 2 inch lcd screen raspberry pi, panel ips, ips display, ips panels, ips lcd display, lcd ips display, ips panel screen, ips lcd screen
Specifications
| Part No.: | NDTI20240320-1 |
| Size: | 2.0 inch |
| Display Format: | 240×320 Resolution |
| Display Type: | IPS Display |
| Display Mode: | Transmissive |
| Touchscreen: | No (Optional with Yes) |
| Optimal View: | Full View |
| Outline Dimension: | 36.05(H)*51.80(V)*2.45(T) |
| Active Area: | 30.6(W)*40.8(H) |
| Supply Voltage: | 2.8V |
| Luminance | 500cd/m² |
| Interface: | MCU 8bit |
| Connection Type: | 22 pin connector |
| Controller： | ST7789P3 |
| Compatibility: | Arduino and similar development boards |
| Operating Temperature: | -10°C ~ 60°C |
| Storage Temperature: | -20°C ~ 70°C |
| Mount Frame: | None |
Display Drawing
Interface Definition
| PIN NO. | Symbol | Level | Description |
|---|---|---|---|
| 1 | LEDA | LED, anode. | |
| 2 | LEDK | LED, cathode. | |
| 3-4 | NC | NC | |
| 5 | IOvCC | 1.8V | Power supply |
| 6 | VCC | 2.8V(typ) | Power supply |
| 7-14 | DB7-DB0 | data bus | |
| 15 | RD | -Read enable in 8080 MCU parallel interface | |
| 16 | WR | -Write enable in MCU parallel interface | |
| 17 | RS | -Display data/command selection pin inparallel interface | |
| 18 | CS | -Chip selection pin | |
| 19 | TE | -Tearing effect signal is used to synchronize MCU to frame memory | |
| 20 | RESET | -This signal will reset the device and it must be applied to properly | |
| 21-22 | GND | GND |
Custom 2'' TFT Display
We provide tailored 2.0'' TFT LCD solutions, allowing you to set key specifications such as resolution, brightness, interface type, and touch features. Our services also cover PCB design, connector placement, and cover glass customization to deliver reliable performance and seamless system integration.
LCD Connector Custom
We can tailor the cable length and connector layout for 2.0 LCD modules to meet your design requirements, providing reliable performance and smooth integration.
Custom LCD Interfaces
“2.0” LCD modules allow for fully customizable cable lengths and connector layouts, enabling precise alignment with your system design. ensures consistent performance.
2.0'' LCD PCB Design
The 2.0” LCD modules support a wide range of interfaces, including MCU parallel, LVDS, SPI, RGB, HDMI, and MIPI DSI. Our experts help you select the best interface to ensure smooth .
2.0'' Touchscreen Adds
Enhance your 2.0” TFT module with resistive or capacitive touch, ensuring easy integration, precise responsiveness, and an improved, intuitive user experience.
Reviews
There are no reviews yet.