ND066PHM6448-A01 | OLED Screen 0.66 inch White 64x48 Resolution I2C Interface for Arduino and Embedded Systems
The ND066PHM6448-A01 is a 0.66 inch PMOLED display module offering crisp, monochrome visuals ideal for compact embedded devices. Featuring a 64×48 resolution and a luminance of 110 cd/m², this transmissive OLED uses the SSD1315 controller and I2C interface for easy integration with Arduino, ESP32, and other microcontrollers. With an operating temperature range from -40°C to 70°C and a 16-pin connector, it’s built for reliable performance in industrial and wearable applications.
Key Features:
Compact, High-Contrast Display: 0.66 inch active area (13.42 x 10.06 mm) with 110 cd/m² brightness for clear monochrome graphics
Easy Integration: I2C interface and SSD1315 controller ensure compatibility with popular development boards
Wide Operating Temperature: Reliable function in harsh environments from -40°C to 70°C
Optional Touchscreen: Available for enhanced user interaction
This PMOLED display is perfect for smart wearables, portable instrumentation, and industrial devices needing energy-efficient, high-contrast display solutions.
Search Keywords:
0.66 inch PMOLED, 0.6 inch OLED display, 64×48 OLED screen, I2C 0.6 inch OLED module, OLED 0.6 inch display, Arduino 0.6 inch OLED, low power 0.6 inch OLED, industrial PMOLED 0.6inch, wearable OLED screen, monochrome OLED module
General Specifications
| Part No.: | ND066PHM6448-A01 |
| Size: | 0.66 inch |
| Display Format: | 64×48 Resolution |
| Display Type: | PMOLED Display |
| Display Mode: | Transmissive |
| Touchscreen: | No (Optional with Yes) |
| Optimal View: | 160° |
| Outline Dimension: | 14.26 X18.46 X1.05 mm |
| Active Area: | 13.42 (W) x 10.06 (H) |
| Supply Voltage: | 3.3V |
| Luminance | 110cd/m² |
| Interface: | IIC |
| Connection Type: | 16 pin connector |
| Controller： | SSD1315 |
| Compatibility: | Arduino and similar development boards |
| Operating Temperature: | -40°C ~ 70°C |
| Storage Temperature: | -40°C ~ 85°C |
| Mount Frame: | None |
Display Drawing
Interface Definition
| NO. | Symbol | Function |
|---|---|---|
| 1 | VLSS | This is an analog ground pin. It should be connected to VSS |
| 2 | VCC | Power supply for panel driving voltage. This is also the most positive power voltage supply pin.When charge pump is enabled, a capacitor should be connected between this pin and VSS |
| 3 | VCOMH | The pin for COM signal deselected voltage level. A capacitor should be connected between this pin and VSS |
| 4 | IREF | This is segment output current reference pin. A resistor should be connected between this pin and VSS to maintain the IREF current at a maximum of 30 uA. |
| 5 | SDA | IIC data input pad. |
| 6 | SCL | IIC clock input pad |
| 7 | NC | NO CONNECTION |
| 8 | RES# | Power Reset for Controller and Driver This pin is reset signal input. When the pin is low, initialization of the chip is executed. |
| 9 | VSS | round of Logic Circuit This is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground. |
| 10 | VDD | Power Supply for Logic This is a voltage supply pin. It must be connected to external source. |
| 11 | VSS | Ground of Logic Circuit This is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground. |
| 12 | VBAT | Power Supply for DC/DC Converter Circuit This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used. |
| 13 | C1N | Positive Terminal of the Flying Inverting Capacitor Negative Terminal of the Flying Boost Capacitor The charge-pump capacitors are required between the terminals. They must be floated when the converter is not used |
| 14 | C1P | |
| 15 | C2N | |
| 16 | C2P |
Custom 0.66'' PMOLED display
We offer custom 0.66'' PMOLED display modules, allowing you to adjust key specifications such as resolution, brightness, and interface options. Our solutions also include personalized connector placements and smooth integration with platforms like Arduino, ensuring optimal system performance.
Custom OLED Display
Design the perfect 0.66” OLED display with fully customizable sizes, resolutions, and configurations, tailored to meet your unique design and application needs.
Custom OLED Interfaces
Customizable cable lengths and connector configurations for 0.66” OLED modules ensure precise integration with your system, providing reliable performance and perfect display alignment.
0.66'' OLED PCB Design
Optimized PCB design for 0.66” OLED modules ensures efficient power distribution and signal integrity, delivering stable, high-quality display performance in compact systems.
Different Color Options
Select from a variety of color options for 0.66” OLED modules, providing customized visual experiences and enhanced design flexibility to perfectly suit your project or application.
Reviews
There are no reviews yet.